Main Products
- Phosphonates Antiscalants, Corrosion
Inhibitors and Chelating Agents - Salts of Phosphonates
-
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid, Sodium salt (PBTC•Na4)
- Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP•Na5)
- Hepta sodium salt of Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMP•Na7)
- Potassium Salt of HexaMethylene-DiamineTetra (MethylenePhosphonic Acid) HMDTMPA•K6
- More
- Polycarboxylic Antiscalant and Dispersant
- Biodegradable Antiscalant and Dispersant
- Biocide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
-
- TH-907 Non-P Scale&Corrosion Inhibitor
- TH-503 Scale and Corrosion Inhibitor for Boiler
- TH-503B Scale and Corrosion Inhibitor for Boiler
- TH-504 Scale and Corrosion Inhibitor for Heating Water
- TH-601 Scale and Corrosion Inhibitor for Iron & Steel Plant
- TH-604 Scale and Corrosion Inhibitor for Power Plant
- More
- Corrosion Inhibitor
- Oxygen Scavenger
- Reverse Osmosis Chemicals
- Other
Shandong Taihe Technologies Co., Ltd.
TEL: +86-632-5113066
FAX: +86-632-5112055
E-mail: info@thwater.net
ADD: No.1, Shiliquan East Road, Shizhong District, Zaozhuang City, Shandong Province, P.R.China
TH-904 aqueous dispersant
Alias: Viscosity Reduer, Water Reducer, Grind Aider
Properties:
The main composition of dispersant TH-904 is anion polymer. It can adsorb on surface of microparticles resulting in static repulsion, resulting in disperse and preventing sedimentation and coarse turn-back. dispersant TH-904 is little foaming, innocuous, non-corrosiveness and non-hazardous.
TH-904 is used as chelant in papermaking coating, building coating, concrete retarder, water reducer, woven and dyeing. Adding TH-904 to slurry during grinding process of bolus alba, lime carbonate, pottery clay, titanium pigment, French chalk, barium sulfate, coal-water slurry, etc., the viscosity can be largely reduced and the dispersed slurry is stable.
Specification:
| Items | Index |
|---|---|
| Appearance | Colorless to light yellow transparent liquid |
| Solid content % | 40.0 min |
| pH (50% water solution) | 8.0~11.0 |
| Density (20â„?g/cm3 | 1.20 min |
Usage:
The dosage of 0.2-2% is preferred (solid/solid), the optimal dosage should be determined by experiment.
Package and Storage:
200L plastic drum, IBC(1000L), customers' requirement. Storage for ten months in shady room and dry place.